Advertising (This ad goes away for registered users. You can Login or Register)

[Release] Arcade Darts VHBL installer (3.36) v2

VHBL (Vita Half Byte Loader) is an open source tool to load PSP homebrews on the Playstation Vita.
VHBL can be downloaded at http://wololo.net/vhbl
Dewo
Posts: 2
Joined: Sun Feb 08, 2015 8:37 pm

Re: [Release] Arcade Darts VHBL installer (3.36) v2

Post by Dewo » Mon Feb 09, 2015 7:48 am

@doctorgoat:

I added the copied files and after that i "readd" the ApeQuest, that i saved on my computer before is changed something.
And than i got the second ApeQuest bubble.
Advertising

acidant
Posts: 5
Joined: Wed Dec 26, 2012 2:40 pm

Re: [Release] Arcade Darts VHBL installer (3.36) v2

Post by acidant » Mon Feb 09, 2015 10:35 am

Do it with Ape Quest Demo. It work!
спасибо!
Advertising

5c0|4p10|\|
Posts: 4
Joined: Sun Feb 08, 2015 3:09 pm

Re: [Release] Arcade Darts VHBL installer (3.36) v2

Post by 5c0|4p10|\| » Mon Feb 09, 2015 6:49 pm

why error c0-11136-2 with ape quest next restart

sidnei55
Posts: 8
Joined: Mon Feb 09, 2015 1:05 am

Re: [Release] Arcade Darts VHBL installer (3.36) v2

Post by sidnei55 » Tue Feb 10, 2015 12:37 pm

qwikrazor87 wrote:Here's the VHBL installer for Arcade Darts on 3.36.

v2: (removes EBOOT.PBP and PATH.TXT from the save after successful installation)
FW336_ArcadeDarts_US_VHBL_install_v2.zip
FW336_ArcadeDarts_EU_VHBL_install_v2.zip

older:
[spoiler]v1:
FW336_ArcadeDarts_US_VHBL_install.zip
FW336_ArcadeDarts_EU_VHBL_install.zip[/spoiler]

Edit:
To start the exploit:
Load savedata > choose first profile.

From the readme:
Make sure that your base game is installed and able to run before running this installer.

Use fake_np to sign VHBL.ISO with your base game.

The base game must NOT be a crappy minis or 3.18 exploit game (that includes not using Arcade Darts as the base).

Place the signed VHBL.ISO (end result should be EBOOT.PBP) into NPUZ00097SLOT00 (or NPEZ00053SLOT00).

Update PATH.TXT to the path of your base game.
So if Uno EU is your base game, place this in PATH.TXT:
ms0:/PSP/GAME/NPEH00020

Transfer NPUZ00097SLOT00 (or NPEZ00053SLOT00) and VHBL01234 to your Vita.

If you get a red screen, transfer the Arcade Darts save back and check LOG.TXT to see where it fails.
If you get a green screen, rebuild the Vita database and launch your base game, VHBL should launch if you use a good base game.
Once you have VHBL successfully running you can use VHBL + Filer to create bubbles, etc. there are many videos/tutorials around. |:

FW336_VHBL_bubble_SOURCE.zip
for who's hard to create the base of the game using the Ape Quest
here's the exploit + the base made only for USA version

http://youtu.be/I5Oel2nTB_c?t=11m6s

in the tutorial teaches (UNO)
do same with Ape Quest [USA]

https://anonfiles.com/file/8529e7b9245f ... 0683091b26
ARK-2 Arcade Darts VHBL [USA] + Gamebase Ape Quest DEMO [USA]

White Screen Fix
Press Home and Continue the Game!

jalapenotrick
Posts: 4
Joined: Tue Feb 10, 2015 12:02 pm

Re: [Release] Arcade Darts VHBL installer (3.36) v2

Post by jalapenotrick » Tue Feb 10, 2015 3:07 pm

First of all: Cannot believe I got lucky enough to already own an exploit game before it got announced for once. Thanks for the guide! :)

Second: I've used this method to install VHBL on my Vita via Arcade Darts, and apparently I can actually use this exact same exploit to do install Ark-2 as well by just swapping out the VHBL.ISO for an ARK2.ISO and then swapping their savedata folders also before continuing on as normal, at least according to what I've read online.

However, I can't seem to find the Ark-2 savedata folder mentioned to swap with the VHBL one I downloaded from this thread. Does anyone know where I could go about getting it? Or if there's a full tutorial yet for installing Ark-2 using Arcade Darts the same way as this?

Sorry if this is considered off topic for the thread.

sidnei55
Posts: 8
Joined: Mon Feb 09, 2015 1:05 am

Re: [Release] Arcade Darts VHBL installer (3.36) v2

Post by sidnei55 » Tue Feb 10, 2015 4:33 pm

jalapenotrick wrote:First of all: Cannot believe I got lucky enough to already own an exploit game before it got announced for once. Thanks for the guide! :)

Second: I've used this method to install VHBL on my Vita via Arcade Darts, and apparently I can actually use this exact same exploit to do install Ark-2 as well by just swapping out the VHBL.ISO for an ARK2.ISO and then swapping their savedata folders also before continuing on as normal, at least according to what I've read online.

However, I can't seem to find the Ark-2 savedata folder mentioned to swap with the VHBL one I downloaded from this thread. Does anyone know where I could go about getting it? Or if there's a full tutorial yet for installing Ark-2 using Arcade Darts the same way as this?

Sorry if this is considered off topic for the thread.

The method I did was the following
Image
I used the Ape Quest Base to Generate BOOT.PBP file
so that I used fake_np
ARK2.ISO I created the EBOOT.PBP
then copy EBOOT.PBP the folder "NPUZ00097SLOT00"

Code: Select all

Edit PATH.TXT
ms0:/PSP/GAME/NPUG80061
Transfer the folder
"NPUZ00097SLOT00" And "ARK_12345" with 138MenuL4

Gravmatrix
Posts: 1
Joined: Thu Sep 04, 2014 1:40 pm

Re: [Release] Arcade Darts VHBL installer (3.36) v2

Post by Gravmatrix » Tue Feb 10, 2015 5:39 pm

sidnei55 wrote:
qwikrazor87 wrote:Here's the VHBL installer for Arcade Darts on 3.36.

v2: (removes EBOOT.PBP and PATH.TXT from the save after successful installation)
FW336_ArcadeDarts_US_VHBL_install_v2.zip
FW336_ArcadeDarts_EU_VHBL_install_v2.zip

older:
[spoiler]v1:
FW336_ArcadeDarts_US_VHBL_install.zip
FW336_ArcadeDarts_EU_VHBL_install.zip[/spoiler]

Edit:
To start the exploit:
Load savedata > choose first profile.

From the readme:
Make sure that your base game is installed and able to run before running this installer.

Use fake_np to sign VHBL.ISO with your base game.

The base game must NOT be a crappy minis or 3.18 exploit game (that includes not using Arcade Darts as the base).

Place the signed VHBL.ISO (end result should be EBOOT.PBP) into NPUZ00097SLOT00 (or NPEZ00053SLOT00).

Update PATH.TXT to the path of your base game.
So if Uno EU is your base game, place this in PATH.TXT:
ms0:/PSP/GAME/NPEH00020

Transfer NPUZ00097SLOT00 (or NPEZ00053SLOT00) and VHBL01234 to your Vita.

If you get a red screen, transfer the Arcade Darts save back and check LOG.TXT to see where it fails.
If you get a green screen, rebuild the Vita database and launch your base game, VHBL should launch if you use a good base game.
Once you have VHBL successfully running you can use VHBL + Filer to create bubbles, etc. there are many videos/tutorials around. |:

FW336_VHBL_bubble_SOURCE.zip
for who's hard to create the base of the game using the Ape Quest
here's the exploit + the base made only for USA version

http://youtu.be/I5Oel2nTB_c?t=11m6s

in the tutorial teaches (UNO)
do same with Ape Quest [USA]

https://anonfiles.com/file/8529e7b9245f ... 0683091b26
ARK-2 Arcade Darts VHBL [USA] + Gamebase Ape Quest DEMO [USA]

White Screen Fix
Press Home and Continue the Game!
I used (in the US at least) the Echochrome Demo since it is only 44 mb, but I will say the White Screen Fix is very appreciated! I got tired of waiting 30 sec to 3 min for my Ark to trigger!

jalapenotrick
Posts: 4
Joined: Tue Feb 10, 2015 12:02 pm

Re: [Release] Arcade Darts VHBL installer (3.36) v2

Post by jalapenotrick » Tue Feb 10, 2015 7:13 pm

sidnei55 wrote:
jalapenotrick wrote:First of all: Cannot believe I got lucky enough to already own an exploit game before it got announced for once. Thanks for the guide! :)

Second: I've used this method to install VHBL on my Vita via Arcade Darts, and apparently I can actually use this exact same exploit to do install Ark-2 as well by just swapping out the VHBL.ISO for an ARK2.ISO and then swapping their savedata folders also before continuing on as normal, at least according to what I've read online.

However, I can't seem to find the Ark-2 savedata folder mentioned to swap with the VHBL one I downloaded from this thread. Does anyone know where I could go about getting it? Or if there's a full tutorial yet for installing Ark-2 using Arcade Darts the same way as this?

Sorry if this is considered off topic for the thread.

The method I did was the following
Image
I used the Ape Quest Base to Generate BOOT.PBP file
so that I used fake_np
ARK2.ISO I created the EBOOT.PBP
then copy EBOOT.PBP the folder "NPUZ00097SLOT00"

Code: Select all

Edit PATH.TXT
ms0:/PSP/GAME/NPUG80061
Transfer the folder
"NPUZ00097SLOT00" And "ARK_12345" with 138MenuL4
Thank you! I just did this, using the NPEZ00053SLOT00 save slot since I'm in EU, and it worked absolutely flawlessly! You're an absolute lifesaver mate :D

sidnei55
Posts: 8
Joined: Mon Feb 09, 2015 1:05 am

Re: [Release] Arcade Darts VHBL installer (3.36) v2

Post by sidnei55 » Tue Feb 10, 2015 8:47 pm

Gravmatrix
White Screen Fix
Press Home and Continue the Game!

Post Reply

Return to “Vita Half Byte Loader”