Page 1 of 1

GPD Win - Bottom Shell Housing

Posted: Thu Oct 26, 2017 3:36 am
by Smoker1
Does anyone know where I can get a 3D Scan of the Bottom Shell Housing? Tried going to the Library to Scan it, but because the Shell is a dark Color, it did not scan properly.
Trying to Modify it to allow for another Battery since the one that came with it is starting to Bulge.

Re: GPD Win - Bottom Shell Housing

Posted: Thu Oct 26, 2017 8:42 am
by dmaskell92
Geez I wanted one of these too :(

Re: GPD Win - Bottom Shell Housing

Posted: Fri Oct 27, 2017 2:04 am
by Smoker1 is a great concept......but the Battery has Issues, Powering On/Off Issue, if you run the right Game long enough and you are using XInput Mode, when you Exit the Game, you will not have the Keyboard. Also only 64GB Storage??????? 4GB RAM??????
Cant wait for the GPD Win 2. So far, you will be able to use a M.2 SATA Card which has up to 500GB. Forgot which type of M.2, but it is apparently a VERY good Card. Also, there is a report of it having 8GB RAM and a m3 Intel Processor. Will also have better Heat dissipation. But the DInput will be removed, Joysticks will be swapped with the DPad/Buttons. Also, ALL the L/R Buttons will be Shoulder Buttons........but the L/R 2 and 3 Buttons need to be swapped. When looking at the Back
R1__R2 ________ L2__L1

Anyone good with 3D Model Editing, here is the 3D Scan/Model for the GPD Win Bottom Shell Housing that GPD sent me. If you can Modify it to allow for a larger Battery, share your Work. Requires any 3D Program that will accept a .stp File. Program I used to View it is FreeCAD!CUdGFKaI!wGSQCWamN6GO ... gPK3Z3Atfk

Re: GPD Win - Bottom Shell Housing

Posted: Sat Nov 18, 2017 3:05 am
by Smoker1
For those who can get access to a 3D Printer, here are some 3D Designs for the GPD Win. I got a few Designs in here, and even the Original Design from GPD. A few Designs were made by Pintek over on Dingoonity. ... fa33d65477